Search

Previous works of the authors have presented the changes in the optical, mechanical, and chemical properties of the oiled areas of the supports that occur upon ageing due to oil-binder absorption in works of art on paper and printed material. In this framework, transmittance FTIR analysis has indicated that the presence of linseed oil induces the conditions to promote the deterioration of the oil-impregnated areas of the paper supports. However, the analysis of oil-impregnated mock-ups did not provide detailed information about the input of linseed oil formulations and the different types of paper support on the chemical changes that occur upon ageing. This work presents the results of ATR-FTIR and reflectance FTIR, which were used for compensating the previous results, proving indications on the effect of different materials (linseed oil formulations, and cellulosic and lignocellulosic papers) on the development of chemical changes, thus, on the condition of the oiled areas upon ageing. Although linseed oil formulations have a determining effect on the condition of the oiled areas of the support, the paper pulp content appears to have an input to the chemical changes that occur in the system of paper–linseed oil upon ageing. The results presented are more focused on the oil-impregnated mock-ups with cold-pressed linseed oil since results have indicated that this causes more extended changes upon ageing. [ABSTRACT FROM AUTHOR]

Condition assessment of works of art created with oil media on paper could be a complex matter when presenting problems of damage due to the absorption of oil binders by the paper support, since they depend on several factors and occur in variable conditions. The present work refers to the results of an investigation on the effect of linseed oils on the color, opacity, morphology, tensile strength, and chemical properties of lignocellulosic papers, in comparison to that of pure cellulosic papers. Lignocellulosic papers are involved in research on new, yet significant, parameters that might influence the behavior of the oil-impregnated areas of the supports upon aging. The research was applied to mock-ups, made of two types of lignocellulosic paper impregnated with three types of linseed oil and subjected to accelaratated ageing in specific conditions of relative humidity and temperature in closed environment. The research involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. The results indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, alterations in opacity, and decrease of pH values, depending mainly on the formulation of linseed oil, as well as a reduction in tensile strength. FTIR analysis results indicated that the chemical changes that occur upon ageing supported the recorded optical and mechanical alterations, while VOC emissions are both associated with the paper type and the kinetics of degradation of the different types of linseed oil.

Oil media on paper, such as oil paintings, sketches, prints, and books, occasionally present problems associated with the effect of oil medium on the paper support, raising a composite matter of condition assessment as it depends on several factors. The present work examines the effect of linseed oil on paper and, in particular, the changes caused by three types of linseed oil on the optical, morphological, mechanical, and chemical properties of pure cellulosic paper, employing mock-ups submitted to artificial ageing in controlled conditions of relative humidity and temperature in airtight vessels. The study involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. Processing of the results has so far indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, as well as alterations in opacity, intense fall of pH values, and severe reductions in tensile strength, while linseed oil processing during manufacture has a significant impact. FTIR spectra have indicated that chemical changes upon ageing are in accordance with those of optical and mechanical changes, while VOC emissions are mostly associated with the drying and degradation of the different types of linseed oil.

Previous works of the authors have presented the changes in the optical, mechanical, and chemical properties of the oiled areas of the supports that occur upon ageing due to oil-binder absorption in works of art on paper and printed material. In this framework, transmittance FTIR analysis has indicated that the presence of linseed oil induces the conditions to promote the deterioration of the oil-impregnated areas of the paper supports. However, the analysis of oil-impregnated mock-ups did not provide detailed information about the input of linseed oil formulations and the different types of paper support on the chemical changes that occur upon ageing. This work presents the results of ATR-FTIR and reflectance FTIR, which were used for compensating the previous results, proving indications on the effect of different materials (linseed oil formulations, and cellulosic and lignocellulosic papers) on the development of chemical changes, thus, on the condition of the oiled areas upon ageing. Although linseed oil formulations have a determining effect on the condition of the oiled areas of the support, the paper pulp content appears to have an input to the chemical changes that occur in the system of paper–linseed oil upon ageing. The results presented are more focused on the oil-impregnated mock-ups with cold-pressed linseed oil since results have indicated that this causes more extended changes upon ageing.

Condition assessment of works of art created with oil media on paper could be a complex matter when presenting problems of damage due to the absorption of oil binders by the paper support, since they depend on several factors and occur in variable conditions. The present work refers to the results of an investigation on the effect of linseed oils on the color, opacity, morphology, tensile strength, and chemical properties of lignocellulosic papers, in comparison to that of pure cellulosic papers. Lignocellulosic papers are involved in research on new, yet significant, parameters that might influence the behavior of the oil-impregnated areas of the supports upon aging. The research was applied to mock-ups, made of two types of lignocellulosic paper impregnated with three types of linseed oil and subjected to accelaratated ageing in specific conditions of relative humidity and temperature in closed environment. The research involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. The results indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, alterations in opacity, and decrease of pH values, depending mainly on the formulation of linseed oil, as well as a reduction in tensile strength. FTIR analysis results indicated that the chemical changes that occur upon ageing supported the recorded optical and mechanical alterations, while VOC emissions are both associated with the paper type and the kinetics of degradation of the different types of linseed oil. [ABSTRACT FROM AUTHOR]

Oil media on paper, such as oil paintings, sketches, prints, and books, occasionally present problems associated with the effect of oil medium on the paper support, raising a composite matter of condition assessment as it depends on several factors. The present work examines the effect of linseed oil on paper and, in particular, the changes caused by three types of linseed oil on the optical, morphological, mechanical, and chemical properties of pure cellulosic paper, employing mock-ups submitted to artificial ageing in controlled conditions of relative humidity and temperature in airtight vessels. The study involved colorimetry, opacity, tensile strength, pH measurements, SEM, FTIR, and VOC analysis with GC-MS. Processing of the results has so far indicated that thermal-humid ageing caused the gradual darkening of the oil-impregnated mock-ups, as well as alterations in opacity, intense fall of pH values, and severe reductions in tensile strength, while linseed oil processing during manufacture has a significant impact. FTIR spectra have indicated that chemical changes upon ageing are in accordance with those of optical and mechanical changes, while VOC emissions are mostly associated with the drying and degradation of the different types of linseed oil. [ABSTRACT FROM AUTHOR]